Quality Assurance

We are focused on customer service and quality, and this culture is embodied in our quality policy: “We will exceed customer expectations for delivering quality products and superior service.”

To achieve this We are in process to get ISO 9001:2015 quality management system certificate.

HDPE PIPE


U PVC PIPE


We produce one of the largest ranges of pressure pipes, drain pipes and conduits to DIN, ISO and BIS dimensional specifications. These pipes are subjected to the various tests that are specified in the standards and detailed below. Our products adhere strictly to standards and specifications. The pipes produced by us undergo all the necessary tests and confirmation to standards, which include the following:

  • Measurement of dimension
    1. length
    2. Outer diameter
    3. Wall thickness/uniformity
    4. Chamfered edges
    5. Uniformity of internal bore
    6. Socket internal diameter and length
    7. Alignment of socket with pipe axis
  • Heat reversion test
  • Test for resistance of acetone
  • Test for resistance to sulphuric acid
  • Test for impact strength at 27 deg
  • Test for impact strength at 0 deg
  • Short term hydrostatic test
  • Long term hydrostatic test
    flattening test

PET BOTTLES , PREFORMS AND HDPE CONTAINERS


HDPE Containers


We conduct all the test in our laboratory as per SON standard and Oil Company guide line. The test details are as follows
  1. Drop Test
  2. Stacking Test with load
  3. Online leak test
  4. Hot water bath test
  5. Top Load test
  6. Visual defect test
  7. Induction seal salability test

PET BOTTLES AND PREFORMS


We conduct all the test in our laboratory as per Customer demands, some major test details are as follows:

1. Online leak test
2. Top Load test
3. Visual defect test
4. Polarized light test for Preform
5. AA contain


TOP